Appendices - Welch Allyn KleenSpec 800 Series Directions For Use Manual

6 English
Inspect the system
1. Examine all components of the cordless illumination system regularly. Components
include the illuminator and charging base.
2. If any component is worn or damaged, replace it with a Welch Allyn-approved part.
For ordering information, contact your local Welch Allyn representative:
www.welchallyn.com/about/company/locations.htm

Appendices

Appendix A: Specifications
Charging station power supply classification: US, Canada, & International; Class I and internally
powered
Characteristic
Input
Output
Category
Physical specifications
Characteristic
Illuminator
Charger
Power supply
LED radiation output
Battery cell
Environment (temperature and humidity)
Characteristic
®
Welch Allyn KleenSpec 800 Series Cordless Illumination System
Specification
100-240v / 50-60Hz
160-80 mA
5v DC
1400 mA
Not AP/APG Equipment
Specification
1.96 W x 1.37 D x 3.74 H in; 50 W x 35 D X 95 H mm
3.14 x 4.33 x 2.55-4.60 in; 80 W x 110 D X 65-117 H mm
1.24 W x 2.16 L x 1.61 D in; 31.5 W x 55 L x 41 D mm
<6.67mW at 400-750 wavelengths
Capacity 400mAh
Voltage 3.7 V
Chemistry Li-Ion Polymer
Rechargeable Li-Ion Polymer
Battery Charge time 4 hours
On-Time use 80 minutes
Specification