Welch Allyn KleenSpec 800 Series Directions For Use Manual page 9

Cordless illumination system
Hide thumbs Also See for KleenSpec 800 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Directions for use
Use the illuminator for a pelvic examination
1. Fully insert the illuminator into a KleenSpec Disposable Vaginal Speculum (in either
direction).
2. Press the power button on the illuminator.
3. Complete the examination.
4. When the examination is completed, remove the speculum and press the power
button to turn off the illuminator.
5. Remove the illuminator from the speculum.
Clean and disinfect
The following are approved wipes for cleaning and disinfecting.
CaviWipes
Super Sani-Cloth
70% isopropyl alcohol
Clean and disinfect the illuminator
Following are directions for cleaning and intermediate disinfecting of the illuminator.
1. Clean the illuminator.
a. Following the wipe manufacturer's instructions, wipe the entire illuminator to
b. Discard used wipe appropriately.
2. Disinfect the illuminator (intermediate level).
a. Follow wipe label instructions for appropriate contact times.
b. Discard used wipe appropriately.
Clean the charging base
1. Unplug the power cord.
2. Use an approved wipe to remove visible debris.
3. Discard used wipe appropriately.
®
®
remove any visible debris.
English 5

Advertisement

Table of Contents
loading

Table of Contents