Receive Access Telephone Numbers (Psl); Receive Output Parameters (Pos); Receive Link For Local Alarm Output (Pod); Receive All Programmed Sms Messages (P#) - MARS COMMERCE ZEUS4-VD Installation Manual

ZEUS4-VD INSTALLATION MANUAL

11.8 RECEIVE ACCESS TELEPHONE NUMBERS (PSL)

By sending this command to ZEUS4-VD you receive SMS message with programmed SL level:
;PSL;

11.9 RECEIVE OUTPUT PARAMETERS (POS)

By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
Outputs parameters (OS1 – OS4):
;POS;

11.10 RECEIVE LINK FOR LOCAL ALARM OUTPUT (POD)

By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
direct output alarm links (OD1 – OD8):
;POD;

11.11 RECEIVE ALL PROGRAMMED SMS MESSAGES (P#)

By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
alarm SMS messages (#0 - #4):
;P#;

11.12 RECEIVE THE POWER LEVEL ON THE UNIT (PPWR)

By sending this command to ZEUS4-VD you receive SMS message with current main power level
in volts or current battery voltage when the unit runs on the backup battery:
;PPWR;

11.13 RECEIVE SET UP PARAMETERS VALUE (PPA)

By sending this command to ZEUS4-VD you receive SMS message with all currently programmed
Setup parameters (LPA, TST, CRE, MNF, MAIN...):
;PPA;

11.14 STATE OF THE CREDIT FOR THE PREPAID CARD

By sending this command to ZEUS4-VD you receive SMS message with Credit amount on your
prepaid SIM card:
;PCCX;
Where X is the number of programmed prepaid card provider.

11.15 STATE OF THE OUTPUTS (PORC)

By sending this command to ZEUS4-VD you receive SMS message with current outputs state.
;PORC;
28