Automatic Input Block System - MARS COMMERCE ZEUS4-VD Installation Manual

ZEUS4-VD INSTALLATION MANUAL
9.9.2 TC parameter remote programming by SMS
For the upper example send the following SMS from the host phone to the ZEUS4-VD:
;TC1=3;TC2=5;TC3=6;
If you would like to receive confirmation SMS write "+" before SMS command:
;+TC1=3;TC2=5;TC3=6;
9.1

AUTOMATIC INPUT BLOCK SYSTEM

With automatic input block system you can define the number of alarm events that can be triggered
in chosen interval before the systems blocks sending alarm events to telephone numbers.
AT – AT parameter defines the number of alarms that have to be triggered before automatic input
system blocks sending alarm events.
IT – IT parameter defines the interval in which previous number of alarms has to be triggered
before automatic input system blocks sending alarm events.
IB – IB parameter defines how long (in seconds) sending of alarm events is blocked when
automatic input block system enables.
Parameters can be set for different inputs with numbers from 1 to 4.
Default values:
Name Number (Default)
AT
IT
IB
Example:
Name
AT1
IT1
IB1
AT3
IT3
IB3
Input 1 will be blocked for 10 minutes if 10 alarm events are triggered within 125 seconds
Input 3 will be blocked for 1 hour and 5 minutes if 5 alarm events are triggered within 12 minutes.
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
0 Default value for number of alarm triggers
Default value for interval length
180
Default value for amount of time block system is enabled
3600
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
10 alarm triggers must occur to enable block system
10
Interval length is 125 second
125
Block system is enabled for 600 seconds (10 minutes)
600
5 5 alarm triggers must occur to enable block system
Interval length is 720 second (12 minutes)
720
Block system is enabled for 3900 seconds (1 hour and 5 minutes)
3900
Description
Description
20