Programming Mode; Programming Telephone Numbers - Tn - MARS COMMERCE ZEUS4-VD Installation Manual

ZEUS4-VD INSTALLATION MANUAL
9

PROGRAMMING MODE

IMPORTANT!!!
Before you insert SIM card into the holder of GSM module or external GSM phone please
disable the PIN CODE!!!!
To program ZEUS4-VD parameters put the SIM card into your personal GSM phone. Add
programming parameters in SIM Card "Phone Book".
ZEUS4-VD is possible to program on 4 different ways:
Using the USB SIM manager on the PC - recommended
Directly on SIM card using personal mobile phone
Remotely by SMS command
With PC Via USB port*
*
Not supported yet
NOTE: When you use new or empty SIM card or when parameters were not yet programmed
ZEUS4-VD automatically sets the default values (see table).
9.1

PROGRAMMING TELEPHONE NUMBERS - TN

PROGRAMMING TABLE – DIRECT PROGRAMMING ON THE SIM CARD
Default values:
Name
TN1
TN2
TN3
TN4
TN5
TN6
TN7
TN8
TN9
TN0
ZEUS4-VD sends an alarm prerecorded voice messages, an alarm SMS messages or both. If the
corresponding name ends with the letter "V", only voice message is sent and if the name ends with
the letter "M" only SMS message is sent.
By pressing * on your phone you switch OFF the redial call for calling number. The
remaining numbers are called as usual. By pressing # you switch off all remaining calls.
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number (Default)
st
1 telephone number
nd
2 telephone number
rd
3 telephone number
th
4 telephone number
th
5 telephone number
th
6 telephone number
th
7 telephone number
th
8 telephone number
th
9 telephone number
th
10 telephone number
Description
9