Main Power Lost Filter Parameter - Main - MARS COMMERCE ZEUS4-VD Installation Manual

ZEUS4-VD INSTALLATION MANUAL
9.3.1 Programming table for LOW BATTERY and telephone numbers linking
Default values:
Name
LN6
Example:
Name
LN6
9.3.2 LN6 remote programming by SMS
For the upper example send the following SMS from the host phone to the ZEUS4-VD:
;LN6=12;
If you would like to receive confirmation SMS write "+" before SMS command:
;+LN6=12;
9.4

MAIN POWER LOST FILTER PARAMETER - MAIN

Parameter MAIN determinates length of the pulse which is required to trigger the alarm after the
main power is lost. Time can be set between 1 and 9999 seconds. The default value is 5 seconds.
For example: When ZEUS4-VD is without main power supply for more than 5 seconds (default) it
sends an SMS message with the following text: "Main Power Lost".
Should the main power return ZEUS4-VD sends an SMS message with the following text: "Main
Power restored".
Programming table for "MAIN POWER LOST" filter – MAIN
9.4.1
Default values:
Name Number (Default)
MAIN
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number (Default)
Telephone number from TN1 to TN0
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
12 Low Battery SMS is sent to TN1 and TN2
ZEUS4-VD PROGRAMMING TABLE
SIM CARD PHONE BOOK
5 Main Power Lost filter (5 seconds default)
Description
Description
Description
14