Assembling Instructions - FLORABEST FLV 1200 B1 Translation Of Original Operation Manual

GB IE
it must be replaced with a
special power cable
available from the
manufacturer or his
service agent.
• Keep the extension cables
away from the sprung
tines and verticutor
knives.
They may damage the
cables and result in
contact with live parts.
• Check that the mains
voltage is the same as
indicated on the rating
plate.
• Avoid body contact with
earthed parts (e.g.
metal fences, metal
posts). There is an
increased risk of
electric shock if your
body is earthed.
• Only use approved
extension cables of the
type H05RN-F with a
maximum length of 75
m and which have been
approved for open-air
use. The stranded cord
16
diameter of the extension
cable must be at least
2.5 mm². Always unreel
a cable drum to its full
length so that the entire
cable can be checked
for damage.
• Use the included cable
suspension when
attaching an extension
cable.
• Never pull the cable to
disconnect the plug from
the socket. Protect the
cable from heat, oil and
sharp edges
• If the connecting cable is
damaged, first disconnect
the extension cable from
the socket. You can then
disconnect the connecting
cable of the equipment.

Assembling instructions

Prior to any work on the implement
always disconnect the plug from the
power socket!
Ensure during assembly that the
power cable is not squeezed and
that it has sufficient play.