FLORABEST FLV 1200 B1 Translation Of Original Operation Manual page 14

Work interruptions:
• After the implement has
been turned off, the
cutting cylinder will
continue to rotate for a
few seconds. Keep hands
and feet well away.
• Do not touch the spring
tines before the implement
has been disconnected
from the mains and the
spring tines have come to
a complete standstill. Risk
of injury owing to a sharp
implement!
• Only remove plant parts
when the implement is
standing completely still.
Ensure that the grass
ejector opening is clean
and free.
• Switch off the power
when the implement is to
be transported, lifted or
tilted and when traversing
other surfaces than grass.
• Never leave the
implement unattended at
place of work.
Children should be
supervised to ensure that
they do not play with the
appliance.
• Always switch off the
implement and disconnect
the power plug:
- Whenever you leave the
implement
- Before you clean the
ejector opening or
unblock or unclog the
implement
- When the implement is
not being used
- During all maintenance
and cleaning work
- When the power cable
is damaged or has
become tangled
- When the implement
hits an obstruction
during work or when
unusual vibrations arise.
Establish the cause and
see if the implement has
been damaged. Do not
repair it yourself! Have
GB IE
13