Projects Management Commands - Siemens WW8000 MP4.70 Technical Manual

Getting started
5
Launching Composer
5.1.1
42
Building Technologies
Fire Safety & Security Products

Projects Management commands

The following describes the commands available from the Projects Management
window.
Note: You must select a project or a folder to activate the respective command
icons.
Icon Name
Open
New
Delete
Rename
Icon Name
New
Delete
Rename
Icon Name
Backup
Restore
Project commands
Description
Open an existing project [➙ 44] among those shown in
the tree or from the Project drop-down list.
Note 1: You can also open a project by double-clicking it
in the Project tree.
Note 2: You can open other projects [➙ 51] from within
Composer.
Create a new project [➙ 43]. Name the project using no
special characters. See the following list of invalid
characters:
\ / * ? < > " | : (colon) . (period – one or more)
Note: You can create additional projects [➙ 51] after
launching Composer.
Delete a selected project.
Rename a selected project.
Folder commands
Description
Create a new folder.
Select and delete an existing folder.
Select and rename an existing folder.
Project maintenance
Description
Select a project to backup.
Note: You must select a project to activate the backup
command icon.
Restore a previously backed-up configuration and put the
data into a specific project file.
A6V10062401_a_en
30.09.2014