Preparing The Appliance; Automatic Rinse - Krups EA86 Manual

Preparing the Appliance

Please ensure that the appliance is placed and used on a flat, stable, heat & water resistant surface.
Remove and fill the water tank (3).
Put it back in place by pressing firmly and re-closing the cover (4).
Remove the cover from the coffee bean container and pour in some coffee beans. Put the cover back on (5).
Do not fill the tank with hot water, milk or any other liquid. If, when the appliance is switched on, the water
tank is missing or insufficiently filled (under the "min" level), the message "Fill the tank" is displayed and
it is momentarily impossible to prepare the recipe.
NEVER PUT GROUND COFFEE IN THE COFFEE BEAN CONTAINER.
The use of oily, caramelised or flavoured coffee beans is not advised for this machine. These types of beans could
damage the machine.
Ensure that no foreign bodies such as little pebbles contained in the coffee beans enter the reservoir. Any damage due
to foreign bodies having entered the coffee bean reservoir shall not be covered by the guarantee.
Do not put any water in the coffee bean container.
To prevent flows of waste water from dirtying your counter top or from potentially burning you, don't forget to install
the drip tray.
Check the cleanliness of your water tank.
First Use / Configuration of the Machine
You may use the App in order to make it easier to configure the machine (see the Application Download).
Plug in the appliance. During its connection, the appliance will automatically be powered and a standby screen will
appear (screen X1 p.30).
Press "On / Off" (6) and follow the steps provided by the instructions on the screen.
Upon first use, the appliance will prompt you to adjust several settings. If you unplug your appliance, you will be
prompted to re-enter some of these settings.
The appliance will ask you to set:
Language
Unit of Measurement
Auto-On
Auto-Off
Clock
Date
Water Hardness
Auto Rinse
Filter
Upon first use, the appliance may request a refill. You may then simply follow the instructions on the screen.

Automatic Rinse

Upon first start-up, you may activate the machine's automatic rinse mode. To do so, choose the option "YES" under the
"Auto Rinse" menu. This rinse will be performed each time the machine is switched on.
For a subsequent modification, you may select "Auto Rinse" by pressing on Settings
Installing the Filter (Claris - Aqua Filter System Cartridge)
Note: To correctly prime your cartridge, ensure that you follow the installation procedure each time you change the
cartridge.For the best flavours and to make sure your appliance lasts as long as possible, we recommend you only use
the F088 Claris-Aqua Filter System cartridge, sold separately
Your appliance will send a message to advise you when to replace your Claris - Aqua Filter System cartridge:
Upon first start-up: choose the option "YES" in the "Filter" function, and follow the instructions on the screen.
For a subsequent installation or replacement: Select "Filter" under the Maintenance
(or change) and follow the instructions on the screen.
Installation of the cartridge in the machine: screw the filter in the bottom of the water tank by using the handle provided
for this purpose (7).
Place a 0.6 L container under the nozzles (8).
You may select the language of your choice from among those listed.
You may select the unit of measurement (either ml or oz).
You may automatically start the pre-heating of your appliance at the time and day of the
week selected
You may choose the length of the period of inactivity after which your appliance will
automatically switch off.
You may select either 12- or 24-hour time display.
You must set the date.
You must set your water hardness between 0 and 4. See "Water Hardness Measurement"
chapter.
You may program a rinse for each time the machine is switched on.
You must indicate whether or not a filter is present (Claris - Aqua Filter System cartridge).
- Auto Rinse.
menu - "Filter" - "Install"
29