Beverage Preparation; Preparing The Appliance; Before First Use; Preparing The Grinder - Krups EA810570 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
TYPES OF
COFFEE
RISTRETTO
ESPRESSO
COFFEE or LUNGO

Preparing the appliance

Pull out and fill the water tank - Fig. 1 and 2.
Put it back in place by pressing firmly and close the lid again - Fig. 3.
Open the coffee bean container lid. Add the coffee beans - Fig. 4.
Close the coffee bean container lid again.
Do not fill the water tank with hot water, milk or any other liquid. If you turn on the appliance when the water
tank is not in place or not correctly filled (under the "min." level,), the
or a cup of coffee will be made impossible.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER.
It is recommended that you do not use oily, caramelised or flavoured coffee beans for this appliance. These kinds of
beans may damage the appliance.
Check that the coffee beans do not contain any foreign particles such as grit, as any damage caused by the presence
of foreign particles will invalidate the guarantee.
Do not put water into the coffee bean container.
Remember to fit the drip tray to avoid waste water flowing onto the work surface and staining it or scalding you.
Check that your water tank is clean.
Initialisation cycle - total duration: around 3 minutes
Turn on the appliance by pressing the button
Put a container with a minimum capacity of 0.6 litres underneath the two coffee outlets and steam nozzle.
- Fig. 6 button: the appliance starts the initialisation cycle for rinsing of the steam and coffee circuits. The
Press the
light
flashes.
The cycle is finished when the light
It is preferable to rinse the 2 circuits out at least once after the appliance has not been used for several days. Each
time you plug your appliance in, it will carry out an initialisation cycle.

Preparing the grinder

You can choose the strength of your coffee by setting the coffee bean grinding fineness. The finer the grinding setting,
the stronger and creamier the coffee should be. Set the desired fineness for grinding by turning the 'Grinding fineness
setting' knob.Turn to the left for finer grind. Turn to the right for coarser grind.
CHANGE THE SETTING DURING GRINDING.
Never force the grinding fineness setting button.
16

BEVERAGE PREPARATION

Number of cups
possible
1
2 x 1
1
2 x 1
1
2 x 1

BEFORE FIRST USE

- Fig. 5. The light
becomes constant. The appliance is now ready to use.
Possible volume
settings (ml)
20 to 30 ml
2 x 20 to 30 ml
in two cycles
30 to 70 ml
2 x 30 to 70 ml
in two cycles
80 to 220 ml
2 x 80 to 220 ml
in two cycles
light will come on and making an espresso
is constant.
Possible strength
settings
or
or
or

Advertisement

Table of Contents
loading

Table of Contents