Unpack The Shipment; Before You Unpack The Enterprise Manager 2100; Unpack The Enterprise Manager 2100 Shipping Carton - Omron Enterprise Manager 2100 User Manual

Table of Contents

3.3 Unpack the Shipment

You must ship or store the appliance:

Within the environmental limits specified in Technical Specifications on page 79 in an

area (or vehicle) that is clean, dry, temperature-controlled, with low humidity.

In accordance with the original package labeling, which describes package orientation

and handling requirements.

3.3 Unpack the Shipment

Unpack the shipment on a clean, level, electrostatic discharge-safe (ESD-safe) surface that is

adjacent to the installation location. Make sure that the workspace is large enough to accom-

modate both the shipping carton and the unpacked appliance.

Before you unpack the appliance:

Orient the carton only as indicated by its labeling (This Way Up).

Carefully inspect the packaging for evidence of damage during transit. If you find pack-

aging damage, request that the carrier's agent is present when you open the packaging.

As you do the unpacking:

1. Compare the actual items received (not just the packing slip) with your equipment pur-

chase order.

2. Verify that all items are present and that the shipment is correct. Hardware Supplied

with the Enterprise Manager 2100 on page 10.

3. Inspect each component for external damage as you unpack it. Contact your local

Omron support immediately if you see any damage. See: How to Get Help on page 15.

1. Place the shipping carton on a stable, flat surface.

2. Use only a safety box cutter to cut the packing tape. Do not use any other type of knife

because you might damage the contents. Open the carton as shown in Figure 3-1.

CAUTION: ESD DAMAGE RISK. Protect the appliance from damage caused

by electrostatic discharge (ESD). wear a grounded wrist-strap or shoe strap

before you remove the antistatic cover.

ATTENTION: RISQUE DE DÉCHARGE ÉLECTROSTATIQUE. Protéger

l'appareil contre les dommages provoqués par les décharges électrostatiques

(ESD). Portez un bracelet antistatique à la poignée ou à la cheville avant de

retirer le couvercle antistatique.

Enterprise Manager 2100 User's Guide

14413-200 Rev. A

Table of Contents