Logical Ports And Protocols Used By A Single Aiv - Omron Enterprise Manager 2100 User Manual

Protocol
TCP
Optional
TCP
UDP/TCP

Logical Ports and Protocols Used by a Single AIV

An individual AIV in a Fleet requires the following logical ports and protocols.
Protocol
Configuration and Monitoring of AIV
Used for MobilePlanner connections to the AIV for purposes of monitoring and configuration.
TCP
TCP/UDP
UDP
Job Monitoring and Submission (ARCL Interface)
Used for managing jobs on the Enterprise Manager. These are typically submitted from call but-
tons or other automation equipment
TCP
TCP
14413-200 Rev. A
Port(s)
prise Manager and accepts unlimited incoming connections. The
port number is configurable.
(This port might be available on the AIV, depending on the
application.)
Configurable Enterprise Manager appliance to WMS/MES
port # Outgoing ARCL Connection: if enabled in the configuration
(Robot Interface then Outgoing ARCL connection setup), then
the Enterprise Manager initiates an outgoing connection to the
specified hostname and TCP port number.
123 Enterprise Manager appliance to NTP server
If you enable a Network Time Protocol (NTP) client Enterprise
Manager appliance (SetNetGo then System and then
Date/Time), the Enterprise Manager appliance attempts to set
its clock from the network time server at the specified IP
address. (This function is available on the AIV, if you do not use
a client Enterprise Manager appliance.)
Range Offboard devices to AIV
1000- If RS232 or Ethernet Port Forwarding is enabled on the AIV
65535 (SetNetGo then Network) then the configured TCP ports are
open on the AIV for incoming connections.
Port(s)
443 Client PC to AIV
7272 Client PC to AIV
10000 AIV to Client PC
7171 Offboard devices to AIV
ARCL Server: if enabled in the configuration (Robot Interface and
then ARCL Server Setup), then this port is open on the AIV and
accepts unlimited incoming connections. The port number is con-
figurable.
Configurable Off-board Devices to AIV
port # Outgoing ARCL connection: If enabled in the configuration (Robot
Interface and then Outgoing ARCL connection setup), then the
AIV initiates an outgoing connection to the specified hostname
and TCP port number.
Enterprise Manager 2100 User's Guide
Chapter 4: Connectors and Indicators
Initiator to Recipient
Initiator ð Recipient
43