Attach The Adjustable Brackets To The Track - Omron Enterprise Manager 2100 User Manual

3.4 Sliding Rail Kit for Rack Mounting
Figure 3-4. Attach the Rail to the Appliance Chassis (Right Assembly Shown).
1. Align the end of the sliding rail with the notch in the chassis pull brackets [1].
2. Attach the rail with four 6 mm M4 screws [2]. Torque each screw to 2 ft-lb (3 N∙m).
3. Repeat Step 1 and Step 2 for the second sliding rail.

Attach the Adjustable Brackets to the Track

Attach the larger, adjustable L-shaped brackets to the telescoping track as follows:
Figure 3-5. Attach the Large L-Brackets to the Track (Right Assembly Shown).
30 Enterprise Manager 2100 User's Guide 14413-200 Rev. A