Table of Contents
Advertisement
3.1 Prepare Your Site for the Enterprise Manager 2100
If you use a Secondary appliance, consider installing it in a rack that is remote from the
Primary appliance to improve disaster tolerance. See also: Plan for Disaster Tolerance on page
34.
DANGER: PERSONAL INJURY RISK. When installing equipment into a
!
rack, read and follow all safety instructions in the rack documentation. Follow
the instructions for stabilizing the rack before you begin the installation.
DANGER: RISQUE DE BLESSURES PERSONNELLES. Lors de l'installation
!
de l'équipement dans un support, lire et suivre toutes les instructions de sécur-
ité de la documentation du support. Suivre les instructions pour stabiliser le
support avant de commencer l'installation.
WARNING: PERSONAL INJURY RISK. Installation might require two
!
people to safely lift and install this equipment in a tall rack.
AVERTISSMANT: RISQUE DE BLESSURES PERSONNELLES. Deux per-
!
sonnes pourraient être nécessaires pour élever et installer l'appareil dans un
support haut en toute sécurité.
Site Electrical Power Requirements
The appliance requires the power specified in: Power Requirements on page 79. Adhere to the
electrical safety information in: Safety on page 17, and make sure that you:
Ground and bond the rack according to local electrical specifications.
l
Complete any necessary electrical work in accordance with local regulations. Electrical
l
installers must be suitably trained and qualified to perform the work.
Omron Adept Technologies, Inc. recommends that you use an uninterruptible power supply
(UPS) for the Primary appliance and a separate UPS for an optional Secondary appliance. If
you do not use an UPS, and you install two appliances in the same rack, connect each appli-
ance to different power distribution units (PDUs) on separate circuits for power redundancy.
Electrical Wiring
DANGER: ELECTROCUTION RISK. Follow all local safety regulations that
determine who can install such equipment, and how to install it. Adhere to all
local safety and mechanical regulations governing the installation of rack-
mounted computer equipment, including power supply, connectors, grounding
and wiring.
22
Enterprise Manager 2100 User's Guide
14413-200 Rev. A
Advertisement
Table of Contents
