Siemens SIMATIC Ident Function Manual page 39

All parameters listed in the table below are valid for RF68xR.
Table 4- 20
PARMID
(hex)
0x41315057
0x41325057
0x41335057
0x41345057
0x41315452
0x41325452
0x41335452
0x41345452
0x5331444C
0x5332444C
0x5333444C
0x5334444C
0x4131504F
0x4132504F
0x4133504F
0x4134504F
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
Parameter values
PARMID Parameter
(ASCII)
A1PW Antenna 01: Radiated power
A2PW Antenna 02: Radiated power
A3PW Antenna 03: Radiated power
A4PW Antenna 04: Radiated power
A1TR Antenna 01: RSSI threshold
A2TR Antenna 02: RSSI threshold
A3TR Antenna 03: RSSI threshold
A4TR Antenna 04: RSSI threshold
S1DL Read point 01: RSSI delta
S2DL Read point 02: RSSI delta
S3DL Read point 03: RSSI delta
S4DL Read point 04: RSSI delta
A1PO Antenna 01: Polarization
A2PO Antenna 02: Polarization
A3PO Antenna 03: Polarization
A4PO Antenna 04: Polarization
Configuring the instructions
4.5 Programming add-on instructions
VALUE
Range of values: 0.5 ... 33
Increment: 0.25
Radiated power of the antenna in
[dBm].
Bytes 1 and 2 are not used, byte 3
represents the integer and byte 4
the decimal place.
Example: A radiated power of
10.25 dBm represents a "VALUE"
of "0x0A19".
Range of values: 0 ... 255
Threshold value for RSSI.
Transponders with lower values are
discarded. Value without unit with-
out a direct relationship with the
radiated power.
Range of values: 0 ... 255
Difference for RSSI values.
Transponders with lower values
relative to the transponder with the
highest RSSI value are discarded.
Value without unit without a direct
relationship with the radiated pow-
er.
Range of values: 0, 1, 2, 4
Polarization of the antenna (for
intelligent antennas e.g. internal
antenna RF685R)
0: default, undefined
•
1: circular
•
2: vertical linear
•
4: horizontal linear
•
Input is bit coded. Combinations
are possible (adding values).
39