Safety - Seco Qseven Q7-974 User Manual

1.4 Safety

The Q7-974 module uses only extremely-low voltages.
While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.
Always switch the power off, and unplug the power supply unit, before handling the board and/or connecting cables or other boards.
Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid
short circuits due to unwanted contacts with other board components.
If the board has become wet, never connect it to any external power supply unit or battery.
Check carefully that all cables are correctly connected and that they are not damaged.
1.5 Electrostatic Discharges
The Q7-974 module, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the
devices and/or components on-board.
Whenever handling a Q7-974 module, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static
surface is also highly recommended.
1.6 RoHS compliance
The Q7-974 module is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.
Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
8