Miscellaneous Configuration Submenu - Seco Qseven Q7-974 User Manual

4.3.6 Miscellaneous Configuration submenu

Menu Item Options
HPET - HPET Support Enabled / Disabled
Clock Spread Spectrum Enabled / Disabled
BIOS Lock Enabled / Disabled
0.75GB
PCI MMIO Size 1.5GB
2GB
Memory optimization for 32-bit
Enabled / Disabled
Windows OS
PCI Express Dynamic Clock
Enabled / Disabled
Gating
Force Legacy Free Enable / Disable
Serial IRQ Enabled / Disabled
Quiet Mode
Serial IRQ Mode
Continuous Mode
Default
Intel I210/I211 Led1
Activity
4.3.7 Security configuration (TXE) submenu
Please notice that all these items can be modified only with Celeron
Menu Item Options
TXE Disabled / Enabled
TXE HMRFP0 Disabled / Enabled
TXE Firmware update Disabled / Enabled
Disabled / Enabled
TXE EOP Message
TXE Unconfiguration Perform Yes / No
Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Description
If this feature is enabled, the High Precision Event Timer table will be added into ACPI Tables.
Allows enabling Clock Chip's Spread Spectrum feature.
Enable or disable BIOS SPI region write protect.
Setup PCI Memory Mapped IO Space, 0.75GB, 1.5GB or 2GB.
Note: to avoid system hangs caused by insufficient memory allocation, reducing this value may lead to the
reduction of the IGD aperture size selected in Advanced Menu  Video Configuration submenu.
When using Windows 32-bit versions, enabling this feature will allow a better memory resource allocation.
Enable or Disable PCI Express Dynamic Clock Gating.
When enabled, this item will force the Legacy Free mode (it will disable the KBC).
Enables or disables the Serial IRQ.
Select Serial IRQ Mode. In continuous mode, the host will continually check for device interrupts. In Quiet
Mode, Host will wait for a SERIRQ slave to generate a request by driving the SERIRQ line low.
®
Intel I210/I211 Gb Ethernet controller LED1 behaviour. Default setting makes LED1 active on link. Setting
to "Activity" makes LED1 active only when network traffic is present
®
SOCs. With Atom SOCs, these items cannot be modified.
Description
Enable or Disable the Intel ® Trusted Execution Engine (TXE, available only on Celeron CPUs)
Enable this option to remove temporarily the flash protection, in order to program the Intel
Enable this option to require a re-flashing of TXE Firmware Image
Send EOP (End of POST) Message before entering OS
Only selectable on CPUs with the TXE feature.
Allows to revert TXE settings to the factory defaults
® TXE region
53