Boot Configuration Submenu - Seco Qseven Q7-974 User Manual

4.3.1 Boot configuration submenu

Menu Item Options
Numlock On / Off
4.3.2 PCI Express configuration submenu
Menu Item
PCI Express Root Port 0
PCI Express Root Port 1
PCI Express Root Port 2
PCI Express Root Port 3 (internal LAN)
4.3.2.1 PCI Express Root Port #x configuration submenus
Menu Item
PCI Express Root Port #0
PCI Express Root Port #1
PCI Express Root Port #2
PCI Express Root Port #3 (internal LAN)
PCI Express Port #x Speed
PCI Express Port #x ASPM
Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Description
Allows to choose whether NumLock Key at system boot must be turned On or Off
Options Description
See submenu
Options
Disabled / Enabled
Auto / Gen1 / Gen2
Disabled / L0s / L1 / L0s & L1 /
Auto
Description
Enable or Disable single PCI Express Root Port #x.
PCI Express Root Ports #0÷#2 are those routed to Qseven
PCI Express Root Port#3 is internally connected to Intel
Disabling this port will result in disabling Ethernet interface.
This menu item is available only when corresponding Root Port is set to Enabled.
Set PCI-e ports link speed/capability. Not available for PCI Express Root Port #3
This menu item is available only when corresponding Root Port is set to Enabled.
Manages PCI Express L0s and L1 power states, for OSs able to handle Active State Power
Management (ASPM). Not available for PCI Express Root Port #3
®
card edge connector
® Gigabit Ethernet Controller I210.
49