Advanced Menu - Seco Qseven Q7-974 User Manual

4.3 Advanced menu

Menu Item Options
Boot Configuration See submenu
PCI Express Configuration See submenu
USB Configuration See submenu
Audio Configuration See submenu
LPSS & SCC Configuration See submenu
Miscellaneous Configuration See submenu
Security configuration (TXE) See submenu
Video Configuration See submenu
Chipset Configuration See submenu
SATA Configuration See submenu
Console Redirection See submenu
ACPI Table / Features Control See submenu
Super I/O Configuration See submenu
Virtual Super I/O Configuration See submenu
INT/IRQ Configuration See submenu
Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Description
Configures settings for Boot Phase
PCI Express Configuration Settings
Configures USB Section
Configures Audio Section
Configures LPSS (Low-Power Sub-System, i.e. DMA, PWM, UART and I2C interfaces) and SCC (Storage
Control Cluster) devices
Enable / Disable Misc. features
Trusted Execution Environment Security Configurations
Configures the options for video section
Configure Chipset's parameters
Select the SATA controller and hard disk drive type installed in the system
Configures the parameters for Console redirection
Configures the parameters for ACPI management
Super I/O Setup Configuration Utility
Install legacy UARTs on ACPI aware OS
Configures PCI INT and IRQ assignments
48