Fixed Legacy Boot Order Submenu - Seco Qseven Q7-974 User Manual

Enabled / Disabled
CD/DVD Rom Boot
Floppy Disk Boot Enabled / Disabled
USB Boot Enabled / Disabled
EFI device first
EFI/Legacy Device Order Legacy device first
Smart Mode
Enabled / Disabled
®
Windows 8 Fast Boot
USB Hot Key Support Enabled / Disabled
Timeout 0 ÷ 60
Reset On No Boot Device
Enabled / Disabled
Found
Touch Controller To Enter SCU Enabled / Disabled
Legacy Device Fixed Order Enabled / Disabled
Fixed Legacy Boot Order
See Submenu
Settings
EFI See Submenu
Legacy See Submenu

4.6.1 Fixed Legacy Boot Order submenu

Menu Item Options
First / Second / Third / Fourth / LAN / EHCI / XHCI / SATA0 /
Fifth / Sixth SATA1 / SD / NONE
Q7-974
Q7-974 User Manual - Rev. First Edition: 0.1 - Last Edition: 2.3 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
Disables or enables booting from CD/DVD
Disables or enables booting from Floppy Disks.
Disables or enables booting from USB boot devices.
This submenu is available only when "Boot Type" is set to Dual Boot Type.
Determine if boot must happen first through EFI devices or through legacy devices, or in Smart Mode.
This submenu is available only when "Boot Type" is set to UEFI Boot Type.
If enabled, the system firmware does not initialize keyboard and check for firmware menu key.
Available only when "Boot Type" is set to UEFI Boot Type and "Windows
Enable or disable the support for USB HotKeys while booting. This will decrease the time needed to boot
the system
The number of seconds that the firmware will wait before booting the original default boot selection.
When this option is enabled, the system will reset itself each time that doesn't find any valid boot device,
instead of waiting indefinitely that a Boot device is plugged.
When this option is enabled, it will be possible to use a Touch screen to enter the Setup Configuration
Utility, avoiding using additional external keyboard. The Touch detection will be used as hotkey
Disable or enable fixed boot order for physical devices. Takes effect at the next boot of the board
This submenu is available only when "Legacy Device Fixed Order" is enabled.
Allows fixing the boot order by physical devices.
This submenu is available only when "Boot Type" is not set to "Legacy Boot type".
The submenu will show a list of EFI boot devices. Use F5 and F6 key to change order for boot priority.
This submenu is available only when "Boot Type" is not set to "UEFI Boot type".
Allows setting of Legacy Boot Order
Description
Allows selecting the boot order of the possible boot devices. If it is necessary to force the boot from a
specific device only, please set is as a first boot device, and set to NONE all other devices.
® 8 Fast Boot" is Enabled.
67