Accessories - Seco Qseven Q7-974 User Manual

Rel. 2.0 comliant module with the intel bay trail family system-on-chips

Table of Contents

5.2 Accessories

SECO can offer the following accessories in completion of Q7-974 functionalities

5.2.1 VGA Adapter module M908

Qseven

specifications didn't include the legacy VGA interface between the interfaces available on golden finger edge connector.

Such an interface, however, it is still widely used and offered by many processors/chipsets, including Intel

As previoulsy written in paragraph 3.2.1, however, Qseven

optional I/O connectors of any kind. For this reason, on Q7-974 board, such an area has been used for an additional FFC/FPC connector,

which carries out VGA interface.

SECO can offer an optional VGA adapter module, ordering code M908, which can be used for the connection of standard VGA displays.

The Adapter module is equipped directly with a 20cm long FFC cable for its connection to Q7-974 board's connector CN1.

DB-15 HD CRT connector is VESA VGA DDC2 compliant.

Q7-974

specifications Rel. 2.0 define an area, on the PCB, that can be used to place

E38xx family of SOCs.

Table of Contents