Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Using the alignment posts, place the I/O board on the palm-rest and keyboard assembly.
2
Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
3
Adhere the I/O-board cables to the palm-rest and keyboard assembly.
4
Connect the I/O-board cables to the system board and close the latches to secure the cables.
GUID-98F27B1C-9F09-48EC-83D7-FC85C825E6A4
Released
computer. After working inside your computer, follow the instructions in
GUID-F396BFDE-A92E-49DA-A86B-25285706F328
Released
Replacing the I/O board
29
After working inside
www.dell.com/
Replacing the I/O board
71