Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Remove the seven screws (M2.5x6) that secure the base cover to the palm-rest and keyboard assembly.
2
Loosen the two captive screws on the base cover.
3
Using a plastic scribe, pry the base cover starting from notches located at the top-left corner of the computer base.
4
Lift the base cover off the palm-rest and keyboard assembly.
GUID-98068FC2-1C1C-46DE-B3FA-DF9D488E9BA1
Released
computer. After working inside your computer, follow the instructions in
GUID-CCE47711-B4BC-4B9B-BA18-D74F5B7F402B
Released
Removing the base cover
After working inside
www.dell.com/
Removing the base cover
6
17