Removing The Solid-State Drive/Intel Optane Memory Module; Prerequisites; Procedure - Dell Inspiron 5584 Service Manual

Identifier
Status
Removing the solid-state drive/Intel Optane
You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer. For more information
about disabling the Intel Optane memory, see
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

Remove the base cover.
Identifier
Status

Procedure

NOTE: The M.2 card slot on your computer may support the following configurations:
• M.2 2230 solid-state drive
• M.2 2280 solid-state drive
• M.2 2280 Intel Optane
NOTE: Depending on the configuration installed, a thermal shield may be installed in your computer. If no thermal shield is
installed, skip steps 1 and 2.
1 Remove the screw that secures the thermal shield to the palm-rest and keyboard assembly.
2 Lift the thermal shield off the solid-state drive/Intel Optane.
GUID-EFFE3DA7-AFC7-4BB0-92C9-4A1B23C2F2F5
Released
Disabling Intel Optane
computer. After working inside your computer, follow the instructions in
GUID-13068DA7-9FE3-41CC-8093-27112047A918
Released
GUID-494240BB-FF72-4DD9-8D74-816D388271B1
Released
memory module
memory.

Removing the solid-state drive/Intel Optane memory module

16
After working inside
www.dell.com/
39