Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program
after you replace the system board.
NOTE:
Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must
make the appropriate changes again after you replace the system board.
Identifier
Status
Procedure
1
Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
2
Replace the two screws (M2x3) that secure the system board to the palm-rest and keyboard assembly.
3
Replace the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.
GUID-67274E98-E2F1-4B7B-A903-F38BA6B62028
Released
Replacing the system board
computer. After working inside your computer, follow the instructions in
GUID-5C7AE72A-E0E3-45BC-A898-F07EB74DBD66
Released
39
After working inside
www.dell.com/
Replacing the system board
95