Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 5584 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base cover.
2 Remove the wireless card.
Identifier
Status

Procedure

1 Peel the tape that secures the display-cable connector latch to the system board.
2 Open the latch and disconnect the display cable from the system board.
3 Note the routing of the display cable and remove the cable from its routing guides on the fan and palm-rest and keyboard assembly.
4 Remove the six screws (M2.5x5) that secure the left and right hinges to the system board and palm-rest and keyboard assembly.
5 Open the hinges.
GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Released

Removing the display assembly

computer. After working inside your computer, follow the instructions in
GUID-40819B15-E569-4098-8202-B032BA8421E3
Released
GUID-31FE21BE-2A57-493A-83DC-AEAFE69B598D
Released
After working inside
www.dell.com/
Removing the display assembly
36
85