Removing The System Board; Prerequisites; Procedure - Dell Inspiron 5584 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program
after you replace the system board.
NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must
make the appropriate changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect
the cables correctly after you replace the system board.
Identifier
Status

Prerequisites

1 Remove the base cover.
2 Remove the battery.
3 Remove the memory modules.
4 Remove the wireless card.
5 Remove the solid-state drive/Intel
6 Remove the fan.
7 Remove the heat sink.
Identifier
Status

Procedure

1 Remove the three screws (M2.5x5) that secure the right hinge to the system board and palm-rest and keyboard assembly.
2 Open the right hinge.
GUID-B54497E8-5AD5-4FF9-AD4A-F32FDBEDE1E8
Released

Removing the system board

computer. After working inside your computer, follow the instructions in
GUID-9B24BA73-D190-4EA3-AA2F-0DF2DFB2F704
Released
Optane.
GUID-2A5CA9D6-D2FD-44BF-8F00-A45D45C5E33E
Released
38
After working inside
www.dell.com/
Removing the system board 91