Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Connect the camera cable to the camera module.
2
Adhere the tape that secures the camera cable to the camera module.
3
Using the alignment post adhere the camera module on the display back-cover and antenna assembly.
4
Route the camera cable through the routing guides on the display back-cover and antenna assembly.
110
Replacing the camera
GUID-690FF12D-2581-4326-8270-C4B813388FD3
Released
computer. After working inside your computer, follow the instructions in
GUID-3535A911-BFA1-42C1-B376-8EBB6F716DD6
Released
Replacing the camera
www.dell.com/
45
After working inside