Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
CAUTION:
Disconnecting the I/O board resets the BIOS setup program's settings to default. Before disconnecting the I/O board,
it is recommended to note the BIOS setup program's settings.
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
hard
drive.
Identifier
Status
Procedure
CAUTION:
Disconnecting the I/O board resets the BIOS setup program's settings to default. Before disconnecting the I/O board,
it is recommended to note the BIOS setup program's settings.
1
Remove the three screws (M2.5x5) that secure the left hinge to the palm-rest and keyboard assembly.
2
Lift the left hinge.
68
Removing the I/O board
GUID-DC61C8F1-86D0-49DE-B8D8-229750E714D6
Released
computer. After working inside your computer, follow the instructions in
GUID-25C60879-ABAD-401C-A2E1-0F68EC4B86F4
Released
GUID-59F36E4C-B494-4F50-A136-BB83A1F113E8
Released
Removing the I/O board
28
After working inside
www.dell.com/