Mechanical Hazards; Heat Hazard; Uv Radiation - Qiagen EZ1 Advanced User Manual

Hide thumbs Also See for EZ1 Advanced:
Table of Contents

Advertisement

1.7

Mechanical hazards

The worktable of the EZ1 Advanced moves during operation
of the instrument.
WARNING
WARNING
1.8

Heat hazard

The EZ1 Advanced worktable contains a heating system.
WARNING
1.9

UV radiation

WARNING
The wavelength of the UV light produced by the UV lamp is
253.7 nm. This wavelength corresponds to ultraviolet light
type C, which can be used for decontamination procedures.
The UV lamp does not produce any ozone.
EZ1 Advanced User Manual 05/2008
Moving parts
Never open the EZ1 Advanced door while the EZ1
Advanced is operating.
Risk of overheating
To ensure proper ventilation, maintain a minimum
clearance of 15 cm and 30 cm at the rear and sides of
the EZ1 Advanced, respectively.
Slits and openings that ensure the ventilation of the EZ1
Advanced must not be covered.
Hot surface
The heating system can reach high temperatures. Avoid
touching it when it is hot.
The EZ1 Advanced contains a UV lamp
Avoid looking directly into UV light. Do not expose your
skin to UV light.
Safety Information
[W9]
[W10]
[W11]
[W12]
1-7

Advertisement

Table of Contents
loading

Table of Contents