Installation Information; Initial Operation - gako unguator EMP Quick Start Manual

Installation Information

The gako unguator EMP weighs 24 lbs (11 kg).
Select a suitable location for the gako unguator EMP.
• Solid, horizontal surface
• Away from direct airflow from air conditioning systems, heaters, open windows or fans
• No direct sunlight, keep the temperature steady between 15°- 30° C (59°- 86°F) and
maximum humidity of 80%
• Clean, dry and dust-free
Remove all components from the cardboard box. Check to ensure that the following compo-
nents are included in your shipment:
• gako unguator EMP mixing device
• Standard mixing Blades 1 - 4
• Power cable
• Disposable Blade starter kit I
• Operating instructions
Please contact the gako support team by E-mail contact@unguator.com in case components
are missing or arrived damaged.
To ensure proper return without additional costs please, hold on to the original cardboard
box and packing material of the gako unguator EMP.
The warranty lapses if the original packing materials are not used for return deliveries.

Initial Operation

If the device is exposed to cold weather conditions, please allow the device to acclimatize
for approx. 30 minutes, this will prevent humidity and condensation from interfering with the
device's proper operation.
The socket outlet is located on the rear of the gako unguator EMP. First connect the power cord
to the socket outlet and then plug the power cord into the power outlet.
The power button is also the emergency button. It is located on the rear of the device.
Use the power button to turn on the gako unguator EMP. Now the device is ready for operation.
chapter 1 - page 1