gako unguator EMP Quick Start Manual page 30

Suspension < 2 %
After finalizing the pre-grinding process both the remaining foundation and all active subs-
tances will be weighed in.
To incorporate air as little as possible push the movable jar bottom up until resistance is felt.
Jar size
Time (min.)
Stirrer
Suspension > 2 %
With the mixing parameters "Suspension > 2 %" solid substances of more than 2 % can be incor-
porated into foundation.
As an example, the incorporation of zinc oxide, salicylic acid or bismuth gallate in foundation.
To ensure a homogeneous distribution we recommend using the standard mixing blade.
For suspensions with ingredient content above 2 % pre-grinding process is not required.
In preparation, add 50 % of the required foundation ground-covering into the jar and the micro-
nized solids to the middle. Add the remainder of the base on top of the ingredients in order to
avoid remaining powder sticking to the blades
The jar bottom should be pushed up as far as possible to prevent incorporating air.
Compounds with a higher content of solids, e.g. pastes, warming of the compound during the
mixing process may occur. This temperature rise may be reduced applying cooled foundation
or using a cooling cuff.
Jar size
Time (min.)
Stirrer
Level 7 (1900 rpm)
15 - 30 ml 50 - 100 ml
1:30 2:00
SMB SMB
tab.: mixing parameter Suspension < 2 %
Level 8 (2150 rpm)
15 - 30 ml 50 - 100 ml
3:00 3:50
SMB SMB
tab.: mixing parameter Suspension > 2 %
contact@unguator.com | unguator.com
200 ml 300 - 500 ml
3:30 4:40
SMB SMB
200 ml 300 - 500 ml
6:45 9:30
SMB SMB
chapter 4 - page 5