Testing Initial Operation - gako unguator EMP Quick Start Manual

Testing Initial Operation

Place the device securely
Establish the power supply, connect the device with the power outlet
Turn on the gako unguator EMP device with the power switch
The display shows the device type "gako unguator EMP"
The display shows the number of current number of preparations "mixed
<<---->>"
The display shows "IQ - Mode >> >>"
Attach the test mixing unit (review chapter 3) into the quick-lock coupling
(review chapter 4)
The gako Button starts the IQ-Modus
The display shows all the levels during IQ-Modes
The display shows IQ-Mode "OK"
Remove the test mixing unit (review chapter 4)
Jump between configuration options with the gako button
Use the +/- buttons to decrease and increase the jar size
With changing the jar size mixing time and mixing parameters are adjusting
Use the +/- buttons to decrease and increase the mixing time
Use the +/- buttons to change the mixing level from 0 to 9
Observe the operation manual
Performance of the test
Approval by pharmacist
Assessment OK
date
date
not OK
signature
signature
chapter 7 - page 3