Stirrer; Flowing Recess Of The Smb - gako unguator EMP Quick Start Manual

In addition, is the gako unguator PRO preloaded with a database of several mixing parameters
for semi-solid NRF formulations. This will optimize the manufacturing of NRF and NRF similar
formulations and increase the compound quality.
The gako unguator Pro is equipped with several ports and together with the optional gako
software ready for potential interconnection with electronic scales, printers (label, paper),
keyboard and networking.
gako unguator Assortment
As well as the gako unguator Devices, the gako unguator Assortment underlies further and
new developments. All gako unguator accessories are compatible with all current and former
available gako unguator Mixing Devices.
gako unguator Stirrer
The gako unguator Stirrer are the gako unguator Standard Mixing Blade (SMB) and the gako
unguator Disposable Blade (Disp. Blade). The stirrer are steadily guided up and down inside the
jar. Their unique design results in a tight contact between the mixing blade and the inside wall
of the jar, which serves, primarily, for distributing the substances during the mixing process.
The lubrication effect of the ointment and the foundation generally protects the jars and the
stirrer against abrasion. Discolorations of the mixing blade are mostly irreversible and therefore
harmless. All SMB and Disp. Blade shafts are dishwasher safe.
The SMB and mixing shaft of the disposable blades are coated with titanium nitride, which
makes them more resistant towards chemical and physical influences.
• Assignment of the gako unguator stirrer
Ensure to use the correct stirrer for the corresponding jar. Selecting the wrong shaft may
cause failure messages with the automated devices. Also ensure that the right shaft is used
when working with the Disp. Blade. Both available shafts are marked for use with sizes
15-100 ml or 200 ml in the gako unguator Jar. They have to be combined with the correct
Disp. Blade. While the same Disp. Blade is used for the 100 ml and 200 ml jar sizes, it still
needs a different shaft for each. See also the operation instructions that come with the
disposable blade shafts.
• Flowing recess of the gako unguator SMB
The flow-adapted shape of the SMB generally cleans itself during the rotating penetration
of the ointment. Depending on ointment's ingredients', compatibility of weighted formula-
tion and also if the jar is considerably under filled (e. g. large volumes of powder), unmixed
ingredients may adhere to the SMB in recesses of flow. These remnants should be transfer-
red into the jar using a spatula when about half of the mixing time is complete.
The air should be diminished again, by pushing the bottom of the jar up, following this pro-
chapter 2 - page 3