gako unguator EMP Quick Start Manual page 24

Followed by the current number of preparations.
pic.: Display current preparations
After a few seconds, it forwards to the next screen.
The start display shows the jar size, mixing time and the mixing speed in levels.
pic.: start screen
Both, the mixing parameters and the jar size, can be changed individually through pressing the
plus and minus touch button. To switch between the operation settings push the gako button.
The changeable setting which will be modified with the plus and minus button flashes.
The time changes in five seconds steps by pressing the plus/minus button. If the plus/minus
button is longer pressed down, the time setting changes will accelerate.
Depending which jar size will be used the recommended standard mixing speed level and the
minimum mixing time will also automatically be changed. Due to high rotation the levels 8 and
9 are not suitable for manufacturing in the jar sizes 300 ml and 500 ml, therefore, they are
disabled for these quantities.
After pressing two seconds the gako button the lift arm will move down for loading the mixing
unit.
Push the gako button again, the lift arm moves automatically up and locks. The mixing process
starts.
pic.: Display initializing pic.: Display start?
chapter 3 - page 6