Applicator Long; Spindle; Coupling - gako unguator EMP Quick Start Manual

• gako unguator Applicator long
pic.: gako unguator Applicator long
gako unguator Spindle
The gako unguator Spindle serves as a dispensing system for gako unguator jar sizes 300 ml or
500 ml. Extract the spindle from the jar. Push carefully the bottom of the jar with a disinfected
SMB (if not available, with a disinfected spatula) all the way down.
pic.: gako unguator Spindle
Caution! If the movable bottom is accidentally perforated or the spindle is permanently locked
in the bottom of the jar, the jar may only serve as dispensing or storage vessel and can no longer
be used for the mixing process.
gako unguator Coupling
The gako unguator Coupling connects two gako unguator Jars by their screw
threads of their dispensing openings and is very useful when preparing oint-
ments in larger batches. Transferring a formulation from a larger jar into a
smaller jar using the coupling will ensure hygiene from the mixing process to
the end user.
The 200 ml jar becomes a convenient transfer device to smaller jars when
their jar bottoms are carefully pressed towards the work surface using an
applicator, long screwed on a 30 ml jar.
pic.: gako unguator

Coupling

The gako unguator Applicator long with a diameter of 2 mm al-
lows formulations to be introduced into large orifices of the body
or probes.
In addition, the applicator long also comes inside each gako un-
guator 200 ml Jar to help pushing up the bottom of this jar size
in full.
Air can be diminished by placing the jar with slightly open lid loosely
onto a spindle and pushing the bottom upwards.
Before giving the jar to the customer, the safety adapter needs to be
removed and the spindle must be screwed in the jar counter clock-
wise from the bottom until it locks into place. The spindle must be
turned clockwise to extract the ointment. One turn dispenses approx.
20 ml of the contents of the jar.
contact@unguator.com | unguator.com
chapter 2 - page 9