Pxie Modules - Keysight Technologies M9703A Startup Manual

PXIe Chassis and Modules

PXIe Modules

How to configure the M9018A chassis to meet your needs. Parameters such as
the following can be configured:
The PCIe link configuration: 1x8, 2x8, or 4x4
Voltage limits around the power supply rails at which an alarm will be gen-
erated if a rail falls outside of its limit
The temperature at which an alarm will be generated if the chassis exceeds this
temperature
The fan speed at which an alarm will be generated if a fan speed falls below
this limit
How to ensure that your modules don't exceed the chassis power supply capa-
city.
Rack mounting of the chassis
How to diagnose and troubleshoot issues with the chassis
How to replace the power supply or the fan assembly
PXIe Modules
Each PXIe module ordered with the MAC Reference Solution will be accompanied
with its own startup guide. The startup guide will detail the following:
How to configure the controller module.
How to load controller software
How to install the module into the M9018A chassis.
How to test the module.
20 Keysight Y1299A-003 MAC Reference Solution Startup Guide