Siemens CP 1243-1 Operating Instructions Manual page 27

Note
LED colors when the module starts up
When the module starts up, all its LEDs are lit for a short time. Multicolored LEDs display a
color mixture. At this point in time, the color of the LEDs is not clear.
Display of the basic statuses of the CP ("DIAG" LED)
Table 2- 4
Basic statuses of the CP
CP 1243-1
Operating Instructions, 04/2017, C79000-G8976-C365-03
Display of the basic statuses of the CP
DIAG Meaning
(red / green) (if more than one point listed: alternative meaning)
•
•
Running (RUN) without serious error
green
•
•
flashing green
•
•
flashing red
•
Error loading firmware
flashing red-green
Power OFF
Incorrect startup
Partner not connected
Firmware loaded successfully
Starting up
Module fault
Invalid STEP 7 project data
LEDs and connectors
2.2 LEDs
27