Processing Status Of E-Mails - Siemens CP 1243-1 Operating Instructions Manual

Diagnostics and upkeep

6.5 Processing status of e-mails

● Siemens Automation MIB
The following exceptions / restrictions apply to the CP.
Write access is permitted only for the following MIB objects of the system group:
– sysContact
– sysLocation
– sysName
For all other MIB objects / MIB object groups, only read access is possible for security
reasons.
Traps are not supported by the CP.
For more detailed information about the MIB files and SNMP, refer to the manual /5/
(Page 142).
Configuration
For information on the configuration, refer to:
● With security functions disabled (SNMPv1): SNMP (Page 53)
● With security functions enabled (SNMPv1 / SNMPv3): SNMP (Page 70)
6.5 Processing status of e-mails
Configuration of the processing status of e-mails
The following status identifiers apply to e-mails configured with the message editor of the
CP. The output of status identifiers is enabled by the option "Enable identifier for processing
status". The status identifier is written to the "PLC tag for processing status" in the CPU.
For information on the configuration, refer to the section Messages (Page 113).
Outputting the processing status of e-mails
The processing status is returned by the CP itself or the servers of the service after transfer
of a message to be sent.
If there are problems delivering messages, you can determine the status via the Web server
of the CPU.
126
A set sysName is sent as the host name using DHCP option 12 to the DHCP server to
register with a DNS server.
Operating Instructions, 04/2017, C79000-G8976-C365-03
CP 1243-1