Advertisement
Technical Note: MicroHAWK ID-40 360
Modify NA-HMI Panel IP Address
17.
NA-HMI Panel Download
17.1.
In the Multiview Explorer, expand "Configuration and Setup" and double-click "HMI Settings". Click
the "TCP/IP" button, circled below, to view the IP Address for Ethernet Port 1 on the NA-HMI panel.
17.2.
Change the NA-HMI panel to the desired IP Address. Ensure that the IP address is on the same subnet as
the NJ/NX controller.
28
Barcode Reading Solution
º
TECHNICAL
NOTE
Advertisement
