Maintenance
Extended Shutdpwn Prpcedure
The following is the recommended shutdown or idle time
procedure for Nitro coffee units.
1. Begin running the weekly cleaning and sanitizing
procedure as explained in the Installation, Operations &
Maintenance manual.
Prime/Clean
Button
Cleaning
Keg
2. Purge all sanitizer out from last cycle.
Prime/Clean
Button
Sanitizing
Keg
3. Following completion of the second sanitizing keg;
A. Close the taps/system
B.
Leave only nitrogen in the system until unit is
placed back in service.
32
This equipment is intended for indoor use only. DO NOT
install, operate or store this equipment in outdoor areas or
where the unit may be subject to freezing temperatures.
DO NOT leave sanitizer in system for extended periods of
Cleaning
Hoses
time, this could cause damage to unit.
4. Upon recommissioning the unit would require weekly
5. Once cleaned a product keg can be place in the unit,
5 Gallon
Bucket
6. The unit is now ready to be put back into use.
Cleaning
Hoses
5 Gallon
Bucket
Warning
n
Warning
n
cleaning and sanitizing performed again prior to use.
connected, and primed.
Part Number 020007115 06/27/2019
Section 4
Need help?
Do you have a question about the Multiplex N2Fusion and is the answer not in the manual?
Questions and answers