How To Select The Tt Mode - Furuno FAR-2218 Operator's Manual

3.4

How to Select the TT mode

You can click the TT acquisition mode indication in the TT•AIS box to select the re-
quired mode.
The indication changes depending on the setting for [TT SELECT] in the [TT] menu.
TT mode selected
[MANUAL 100]
[MANUAL 75 • AUTO 25]
[MANUAL 50 • AUTO 50]
[MANUAL 25 • AUTO 75]
[AUTO 100]
You can set the system to acquire targets automatically, manually, or a combination
of automatic and manual.
How to set up the acquisition mode
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [6 TT].
Note: You can also right-click "TT" in the [TT•AIS] box to access this menu.
4. Select [2 TT SELECT], then select the acquisition condition.
Your selection here changes how many targets can be acquired, both automati-
cally and manually.
TT aquisition
mode
"TT OFF"
"TT OFF"
"TT OFF"
"TT OFF"
"TT OFF"
3. TARGET TRACKING (TT)
OFF
Indication change
"TT MAN" "TT OFF"...
"TT MAN/AUTO" "TT OFF"...
"TT MAN/AUTO" "TT OFF"...
"TT MAN/AUTO" "TT OFF"...
"TT AUTO" "TT OFF"...
3-3