Furuno FAR-2218 Operator's Manual page 230

5. VIDEO PLOTTER OPERATION
6. Close the menu after changing the settings.
A description for each item is listed below.
[LAND COLOR]: Selects color for land from nine available colors.
[LAND CONTOUR COLOR]: Selects color for edge from 15 available colors.
[BACKGROUND COLOR]: Selects color for background from six available col-
ors. Change the background color when targets and chart lines are hard to see.
[CHARACTER(IMPORTANT)]: Turns important text on or off.
[CHARACTER(OTHER)]: Turns other text on or off.
[PLACE NAME]: Turns geographical name on or off.
[NAV AIDS]: Turns navigational data display on or off for navigational aids
([LIGHT BEACON] on page 1, through to [SOUNDINGS] on page 4). Each navi-
gational aid can be turned on or off individually. To show the data for a navigation-
al aid, the individual setting must also be set to [ON].
Note: When [NAV AIDS] is set to [OFF], no navigational aid data is displayed, re-
gardless of the individual setting for each navigational aid.
Navigational aid data (see following tables): Turns each mark on or off. To dis-
play [MARINE FARM], select [LINE] or [LINE+SYMBOL].
Mark name
[LIGHT BEACON]
[LANDMARKS]
[FISHING EQUIP-
MENT]
[ALARM AREA]
[FOG SIGNAL]
[HARBOR FACILI-
TIES]
Note: If the text is displayed with a mark, the text is difficult to see depending on the background.
The mark display for light sector differs according to the setting of light beacon.
For details, see the table below.
[LIGHT BEACON]
set to [ON].
5-28
Display
Mark name
example
[BUOY]
[OBSTACLES]
[COMP]
[MOUNTAIN-
TOP]
[SIGNALS]
[SMALL VESSEL
SERVICE]
[LIGHT SECTOR] set to [ON].
Light sector and range lines are dis-
played (lines for range are long).
Range line
Light sector
Display
example
[LIGHT SECTOR] set to [OFF].
Only light sector is displayed (lines
for range are short).
Light buoy
Display
Mark name
example
[DEPTH LINES
/ CURRENT]
[OBST IN
SAFE AREA]
[WATER
QUALITY]
[LANDSCAPE]
[SERVICE]
[MARINE
FARM]