Echo Stretch - Furuno FAR-2218 Operator's Manual

1.23

Echo Stretch

The echo stretch feature enlarges targets in the range and bearing directions to make
them easier to see, and it is available on any range. There are three types of echo
stretch, 1, 2 and 3, and the higher the number the greater the amount of stretch.
Note: The echo stretch magnifies not only small target pips but also returns (clutter)
from sea surface, rain and radar interference. For this reason, make sure these types
of interference have been sufficiently reduced before activating the echo stretch.
You can access this feature from the InstantAccess bar
able options are: [OFF], [1], [2] or [3].
How to use echo stretch from the InstantAccess bar
To set echo stretch, select the [ES] button (
left-click to cycle through the settings.
The available settings, in cyclic order, are: [OFF]
How to use echo stretch from the menu
1. Open the menu.
2. Select [1 ECHO].
3. Select [2 CUSTOMIZED ECHO].
Note: You can also right-click the [PICTURE]
box to access this menu.
4. Select [3 ECHO STRETCH].
5. Select the required setting.
6. Close the menu.
1. OPERATIONAL OVERVIEW
™
, or from the menu. The avail-
TM
ES
) on the InstantAccess bar
OFF
[1] [2] [3]
™
, then
[OFF]...
1-35