Furuno FAR-2218 Operator's Manual page 261

ALR ALF
Alert ID Alert ID
- 52001,25 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the hall sensor.
- 52001,26 HW STATUS NO-
Remedy: Press the ALARM ACK key. Unlock the antenna.
- 52001,27 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power supply.
- 52001,28 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the antenna brake.
- 52001,29 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the motor.
- 52001,31 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power supply.
- 52001,32 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the PM board.
- 52001,41 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power.
- 52001,42 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power.
- 52001,43 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the RF-Converter.
APPENDIX 3 ALERT CODES, MESSAGES & MEANINGS
Alert title
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
Priority &
Category
Caution Message: "MTR-DRV:HALL SENSOR
Cat: B ERROR"
Meaning: Error in the hall sensor signal
detected by the MTR-DRV board.
Caution Message: "MTR-DRV:ANTENNA
Cat: B LOCK"
Meaning: Antenna lock detected by the
MTR-DRV board.
Caution Message: "MTR-DRV:POWER SUP-
Cat: B PLY ERROR"
Meaning: MTR-DRV board detected
an drop in power.
Caution Message: "MTR-DRV:BRAKE RESIS-
Cat: B TANCE ERROR"
Meaning: MTR-DRV board detected
an error in the brake resistance.
Caution Message: "MTR-DRV:OVERLOAD"
Cat: B Meaning: MTR-DRV board detected
an overload.
Caution Message: "PM:P12V POWER ER-
Cat: B ROR"
Meaning: Voltage in the +12V line of
the PM board is outside rating.
Caution Message: "PM:PLL UNLOCK"
Cat: B Meaning: PM board's PLL is unlocked.
Caution Message: "RF-CONV:P6V POWER
Cat: B
ERROR"*
Meaning: Voltage in the +6V line of the
RF-Converter is outside rating.
Caution Message: "RF-CONV:P48V POWER
Cat: B
ERROR"*
Meaning: Voltage in the +6V line of the
RF-Converter is outside rating.
Caution Message: "RF-CONV:IF PLL UN-
Cat: B
5
LOCK"*
Meaning: PLL lock on the IF side of the
RF-Converter is unlocked.
Alert description
5
5
AP-17