Installation; Installation Site; Installation Configuration - STIEBEL ELTRON MINI-E 2-1 Operation And Installation

INSTALLATION

Note:
Installing the supplied aerator(s) is required, and provides
optimum water flow.
10. Installation

10.1 Installation site

Do not install in an area that can be exposed to temperatures below
41 °F (5 °C).
Ensure access to the opening screws on both sides of the cover so
that they can be easily removed if service is necessary.
The appliance is suitable for an undersink or oversink installation. It
can be installed with water connections at the top or at the bottom.
DANGER: Electrocution
The adjustment screw for setting the temperature is live,
and the IP25 protection is only given when the appliance
back panel is fitted.
WWW.STIEBEL-ELTRON-USA.COM
10.2 Installation configuration
10.2.1 Typical installation
1 Tee
2 Shut-off valve
3 Aerator
MINI ™ -E SERIES TANKLESS ELECTRIC WATER HEATERS | 9
3
1
2