Installation/Removal Of Plug-In Boards - Sony HDS-X5800 Installation Manual

1-6. Installation of Optional Boards

1-6-3. Installation/Removal of Plug-in Boards

c
Before installing or removing the boards, be sure to turn
off the power switches and disconnect all of the power
cords (4 cords) from the wall outlet. If the board is at-
tached or removed with the power on, an electric shock
may result or the board may be damaged.
On the front panel side
1. Remove the front panel. (Refer to Section 2-2.)
2. Remove the four screws, and then remove the board
retainer plate.
PSW3 x 6
Board retainer plate
PSW3 x 6
1-8 (E)
HKS-5820M/5830M/5830SD
Installation
1. With the eject lever opened, insert the desired board
into the corresponding slot.
n
Insert the board while applying equal force to the eject
levers at both ends of the board.
Model name Board name
HKS-5820M IPM-98
HKS-5830M MX-103
HKS-5830SD MX-104
2. While closing the eject levers in the direction of the
arrow A, push in the board.
n
Check that the board is securely connected to the MB-
939 board.
(In the case of the HKS-5820M)
Eject lever
B
Eject lever
A
IPM-98 board
A
3. Attach the board retainer plate and the front panel.
Installation slot
IN slot
OUT slot
OUT slot
IN slot
B
Eject levers
HDS-X5800