Installation Of Plug-In Boards - Sony DVS-7200A Installation Manual

4-1. Installation of Plug-in Boards

4-1. Installation of Plug-in Boards
It is possible to be used DVS-7200A for various systems, and its functions can be extended by selecting
the optional boards. Each plug-in board must be installed in the corresponding slot of DVS-7200A.
Confirm that all the boards are in the specified slots by referring to the following table.
For the details of how to install the plug-in board, refer to "4-3-2. Inserting/Pulling Out of Plug-in
Boards".
The board name are displayed near the eject lever at the left side on the A side of each plug-in board. The
slot numbers that can be installed the board are displayed on the inside of the front panel of DVS-7200A.
Like the standard board, each optional boards should also be installed in the specified slot according to
the slot number display.
1 2 3
CPU-264 YC-59
MY-66
CC-81
n
(1) Confirm that the connectors on each board are securely connected to the MB-618 board of the main
unit.
(2) If the board is installed in an incorrect slot, a system error occurs. Then the system is not properly
activated.
(3) Be sure to confirm the power supply voltage when an optional board is added or a board is replaced.
(Refer to "5-2. Adjustment of Secondary Power Supply Voltage".)
4-2
4 5 6 7 8
ENC-34 ENC-34 CRK-10 MIX-35 CRK-10
ADC-22 ADC-22 CRK-11 BD-26 CRK-11
BD-35
9 10 11 12 13
MIX-35 MIX-35 OUT-9 OUT-9
BD-26 BD-26
BD-35 BD-35
Eject lever
Board name
(A side)
14 15 16 17 18
XPT-16 XPT-16 ADC-21 ADC-21 ADC-21
DI-36 DI-36 DI-36
DVS-7200AE IM