1-1. DVS-7200A
1-1-3. Inserting/Pulling Out of Plug-in Boards
1-1-3. Inserting/Pulling Out of Plug-in Boards
c
To avoid shock hazards and/or damage to the plug-in boards, be sure to turn off the power switch before
inserting or pulling out the plug-in boards.
(1) Remove the front panel. (Refer to the section 1-1-1.)
(2) Remove the 12 screws, the two board retainers and the one board holder.
Board retainer
Board holder
1-4
PWH4 x 6
PWH4 x 6
PWH4 x 6
Board retainer
PWH4 x 6
PWH4 x 6
PWH4 x 6
DVS-7200AE MMP1